Husqvarna 701 Enduro 2017 Repair Manual page 115

14 WHEELS
113
Check the chain sliding guard for wear.
If the lower edge of the chain pins is in line with or below the chain sliding
guard:
»
V A
V
- Replace the chain sliding guard.
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
- Tighten the screws on the chain sliding guard.
Guideline
islV
LK '4
Loctite® 243™
Screw, chain sliding
guard
M6 8 Nm
(5.9 Ibf ft)
o
Ku
V00513-10
Check the chain sliding piece for wear.
If the lower edge of the chain pins is in line with or below the chain sliding
piece:
»
©
- Change the chain sliding piece.
Check that the chain sliding piece is firmly seated.
If the chain sliding piece is loose:
- Tighten the screw on the chain sliding piece.
Guideline
7 jr
9
»
Screw, chain sliding piece M8 15 Nm
(11.1 Ibf ft)
*
S01040-10
Check the chain guide for wear.
Info
Wear can be seen on the front of the chain guide.
I
If the light part of the chain guide is worn:
- Change the chain guide.
n
»
400985-01
Check that the chain guide is firmly seated.
If the chain guide is loose:
- Tighten the screws on the chain guide.
Guideline
■
»
i
!* |
%
Remaining screws, chassis M6 10 Nm
(7.4 Ibf ft)
■i*
V00514-01
Finishing work
- Remove the motorcycle from the lift stand. (Si p. 12)