Installing The Thermostat; Installing The Oil Filter - Husqvarna 701 Enduro 2017 Repair Manual

18 ENGINE
221
Mount and tighten screws
©
Guideline
0 ifoSk
ms** W,
Screw, rocker arm shaft M8x55 15 Nm (11.1 Ibf ft)
*
Mount and tighten screws
0
Guideline
N0
*4
T
$
Screw, rocker arm shaft M8x40 15 Nm (11.1 Ibf ft) m
Check the valve clearance. (US p. 218)
i
311800-10
18.5.26 Installing the thermostat
Position thermostat O with the gasket.
S Drill hole
o
must face upward.
©
-i
o
311744-10
Position the thermostat case.
Mount and tighten screws
0
Guideline
Loctite® 243™ Screw, thermostat hous- M6 10 Nm
(7.4 Ibf ft)
0
ing
311742-11
18.5.27 Installing the oil filter
Insert oil filter Q.
jtf ^
/M '
O
[Vj
e
311739-11
I
Oil the O-ring of the oil filter cover and mount it with the oil filter cover.
Mount and tighten screws
0
Guideline
0
6 Nm (4.4 Ibf ft) Screw, oil filter cover
M5
>
r
311738-11