Husqvarna 701 Enduro 2017 Repair Manual page 243

22 LUBRICATION SYSTEM
241
Thoroughly clean the oil drain plug with magnet.
Mount and tighten the oil drain plug with the magnet and a new seal ring.
Guideline
Oil drain plug with magnet M12x1.5 20 Nm (14.8 Ibf ft)
A
Eu jfl
I'm
:©
m
€
F00580-01
Remove screws ©. Remove oil filter cover © with the O-ring.
Pull oil filter
0
out of the oil filter housing.
W
©
Circlip pliers reverse (51012011000) (iP p. 321)
o
©
PF00582-10
Remove screws ©. Remove oil filter cover © with the O-ring.
Pull oil filter © out of the oil filter housing.
Circlip pliers reverse (51012011000) («3 p. 321)
Completely drain the engine oil.
Thoroughly clean the parts and sealing surfaces.
H
m
© m
■
:>
F00588-10
Remove screw plug with oil screen © and the O-rings.
- —
PJA
)
QtJy
©
.
mrO
F00581-10
Remove screw plug
©
with oil screen © and the O-rings.
Completely drain the engine oil.
Thoroughly clean the parts and sealing surfaces.
m
©
F00583-10
Position oil screen © with the O-rings on a pin wrench.
Position the pin wrench through the drilled hole of the screw plug in the opposite
section of the engine case.
Push the oil screen all the way into the engine case.
jm
r
a
F00586-10