Fork, Triple Clamp; Adjusting The Compression Damping Of The Fork; Adjusting The Rebound Damping Of The Fork - Husqvarna 701 Enduro 2017 Repair Manual

6 FORK, TRIPLE CLAMP
15
6.1 Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
I
(EU)
Turn white adjusting screw Q clockwise as far as it will go.
Info
Adjusting screw O >
s
located at the upper end of the left fork leg.
The compression damping is located in left fork leg COMP (white
adjusting screw). The rebound damping is located in right fork leg REB
(red adjusting screw).
I
1
Turn counterclockwise by the number of clicks corresponding to the fork
type.
Guideline
V00506-10
Compression damping
Comfort
15 clicks
Standard
12 clicks
Sport
10 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
I
(US)
Turn white adjusting screw Q clockwise as far as it will go.
Info
Adjusting screw O
is
located at the upper end of the left fork leg.
The compression damping is located in left fork leg COMP (white
adjusting screw). The rebound damping is located in right fork leg REB
(red adjusting screw).
I
m
Turn counterclockwise by the number of clicks corresponding to the fork
type.
Guideline
*
V00529-10
Compression damping
Comfort 15 clicks
Standard
12 clicks
Sport 10 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
I
6.2 Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
I