Husqvarna 701 Enduro 2017 Repair Manual page 152

18 ENGINE
150
Position the bleeder hoses.
Mount the spring band clamps
©
using the special tool.
Pliers for spring band clamp (60029057100) p. 323)
B.
<*
D02796-11
Plug in the connector of the engine coolant temperature sensor
©
m
V
(
)
D02795-10
Connect plug-in connectors
©
of the gear position sensor, crankshaft position
sensor, and alternator.
m
0
m
v
■
D02794-11
Position the throttle valve body.
Position and tighten hose clip ©.
Guideline
i
Hose clamp, intake flange M4 2.5 Nm
(1.84 Ibf ft)
.
a
.,
D02793-11
Position hose
©
on the cylinder head.
Hi
V
V
^7
D02792-11
Position electrical connection © on the starter motor. Mount and tighten the
screw. Mount the protection cap.
Guideline
\
Screw, cable on starter motor M5 3 Nm (2.2 Ibf ft)
m
Position the ground wire on the starter motor. Mount and tighten screw
©
Guideline
vi
Loctite® 243™ Screw, starter motor M6 10 Nm
(7.4 Ibf ft)
D02791 -11