Mask, Fender; Removing The Front Fender; Installing The Front Fender - Husqvarna 701 Enduro 2017 Repair Manual

13 MASK, FENDER
96
13.1 Removing the front fender
Preparatory work
- Switch off the ignition by turning the ignition key to the OFF 53 position.
- Remove the headlight mask with the headlight. (33 p. 141)
Main work
- Remove screws O ■
- Remove screws
e
and take off the fender.
A.
» *
\
j
0
1
-
\J
O
0
I
S01037-10
_
13.2 Installing the front fender
Main work
- Position the front fender. Mount and tighten screws O-
Guideline
V
Remaining screws, chassis M6
10 Nm (7.4 Ibf ft)
» *
u
0 .0
i
Mount and tighten screws
0
Guideline
VI
0
O
10 Nm (7.4 Ibf ft) Remaining screws, chassis M6
S01037-11
Finishing work
- Install the headlight mask with the headlight. (13 p. 141)
- Check the headlight setting. (33 p. 140)