Removing The Engine - Husqvarna 701 Enduro 2017 Repair Manual

18 ENGINE
144
18.1 Removing the engine
Preparatory work
- Switch off the ignition by turning the ignition key to the OFF 53 position.
- Remove the seat. (KS p. 82)
- Disconnect the battery. (83 p. 119)
- Raise the motorcycle with the work stand. (83 p. 12)
- Take off the side cover. (H p. 83)
- Remove the air filter box. (K3 p. 78)
- Remove the manifold, (83 p. 74)
- Remove the engine guard. (S3 p. 43)
- Drain the coolant. (IS p. 235)
Main work
- Remove the hose clips O- Pull off the radiator hoses.
is
IT®
;
nil
i
' ID02785-10
Remove screws
✓
ft
*"* D02786-10
Remove screw
Remove screw ©.
Take off the engine sprocket cover.
Remove screw
0
with the washers.
Take off the shift lever.
■ v
m
©:
ns
-—
©
&
D02787-10
Bend up lock washer
©
Have an assistant operate the rear brake.
Remove the nut of the engine sprocket with the lock washer.
IT
K
J* '
w0 ™
©
• j ar
■7 '
<
D02788-10
Remove nut Q. Remove the chain adjuster.
Pull out the wheel spindle only far enough to allow the rear wheel to be pushed
forward.
Push the rear wheel forward as far as possible and take the chain off the rear
sprocket.
m
% m
1
- • )ffq
^*
m
\
Info
The rear wheel must not be fully removed.
*
I
D00934-10