Disassembling The Hydrostop Unit; Disassembling The Seal Ring Retainer - Husqvarna 701 Enduro 2017 Repair Manual

6 FORK, TRIPLE CLAMP
24
6.13 Disassembling the hydrostop unit
Info
The procedures are the same on both fork legs.
I
Preparatory work
- Disassemble the fork legs. (El p. 19)
Main work
- Clamp hydrostop unit using special tool to sleeve O and loosen.
©
/
Clamping stand (T1202S) (E8 p. 332)
f V
©
Turn hydrostop unit, mount on a fitting hexagon socket and clamp into a vice.
Remove sleeve O-
Remove shim set
©
and washer
©
K -
r
r_
I
:
R00017-10
Remove adapter ©.
Remove hub
©
Remove O-ring from the hub.
O
©
mt
x
R00019-10
Remove shim set
©
Remove washer Q.
Remove O-ring ©.
0
©
©
I ' -
R00021-10
6.14 Disassembling the seal ring retainer
Info
I
The steps are identical for both fork legs.
Preparatory work
- Disassemble the fork legs. (E8 p. 19)
- Remove the spring. (Ei p. 21)
- Disassemble the cartridge, (i® p. 21)
Main work
- Remove pilot bushing support O-
- Remove O-ring
©
and seal ring
©
©
©
O
m
■V,
R00013-10