Husqvarna 701 Enduro 2017 Repair Manual page 63

9 SHOCK ABSORBER, SWINGARM
61
Main work
- Push the spring and sleeve onto the compression adjuster. Mount the piston.
- Mount and tighten compression adjuster ©-
Guideline
w m 4
Compression adjuster M26x1 30 Nm (22.1 Ibf ft)
\ /
i
©
201279-11
Mount and tighten screw
©
Guideline
©
Filling port screw M10x1 14 Nm (10.3 Ibf ft)
\
201277-11
Clamp the damper in the vise using soft jaws.
Fill the damper cartridge about half full.
Shock absorber fluid (SAE 2.5) (50180751S1) (89 p. 316)
?c
r.
J
201288-10
Grease O-ring
©
of the seal ring retainer.
Lubricant (T158) (IS p. 318)
Mount the piston rod carefully.
_
M.
201278-11
Install the seal ring bearer © and push it under the ring groove.
Mount lock ring
©
©
©
Info
I
Do not scratch the inner surface.
Pull out the piston rod so that the seal ring retainer rests against the lock ring.
i
I
201276-10
_