Installing The Gear Position Sensor; Installing The Spacer - Husqvarna 701 Enduro 2017 Repair Manual

18 ENGINE
222
Insert oil filter
©
W
L
i *S>,
. 4—©
D02692-11
Oil the O-ring of the oil filter cover and mount it with the oil filter cover.
Mount and tighten screws ©.
Guideline
A
©
1
Screw, oil filter cover M5 6 Nm (4.4 Ibf ft)
w
x
: /
Jfl ^
V
D02691-11
6
18.5.28 Installing the gear position sensor
Position gear position sensor O-
Mount and tighten screws
0
Guideline
<3t«
4
• *
l®
«
Loctite® 243™ Screw, gear sensor M5 5 Nm
(3.7 Ibf ft)
C2
V 311737-11
18.5.29 Installing the spacer
Before mounting, grease spacer Q in area
o
and O-ring
0
0
©
\
Long-life grease (HI p. 318)
©
Position the O-ring in the recess of the spacer.
302140-10
Grease the shaft seal ring.
Long-life grease (HU p. 318)
-
Push spacer Q with the O-ring onto the countershaft with a twisting motion.
S The recess with the O-ring faces inward.
S The shaft seal ring rests against the spacer along its entire circumference.
O
m
r.J
r\
mm
r
311736-10