Table of Contents
Advertisement
18 ENGINE
223
18,5,30 Installing the alternator cover
Apply sealing compound lightly in the area of the cable sleeve.
Loctite® 5910
m\ij
Mount dowel O and position the alternator cover gasket
©
©
IS
a
a
,
311735-11
w
Position the alternator cover.
Mount and tighten screws
0
Guideline
JR
I
Screw in alternator cover
10 Nm (7.4 Ibf ft)
M6
mr©
©
m
Mount and tighten screws ©.
Guideline
y
Screw, alternator cover
M6x30
10 Nm (7.4 Ibf ft)
311734-11
Mount and tighten screw
0
Guideline
Loctite® 243™
Screw, alternator cover
(chain shaft through-hole)
M6
10 Nm
(7.4 Ibf ft)
18.5.31 Installing oil screens
Push the oil screen with O-rings on to a pin wrench. Push the pin wrench through
the opening into the drill hole of the opposite engine case wall and push the oil
screen as far as possible into the engine case.
£
v
v
■ *.
'*
:
y?
■
.*
*.
311728-10
Mount the oil drain plug O with the magnet and a new seal ring and tighten it.
Guideline
!
Oil drain plug with magnet
20 Nm (14.8 Ibf ft)
M12x1.5
Mount and tighten screw plug
0
with the O-ring.
Guideline
wy
■
a
15 Nm (11.1 Ibf ft)
Plug, oil screen
M20x1.5
311726-10
Position the oil screen © with O-rings.
Mount and tighten screw plug © with the O-ring.
Guideline
l i
15 Nm (11.1 Ibf ft)
Plug, oil screen
M20x1.5
©
m
311727-11
Advertisement
Table of Contents
