Disassembling The Piston Rod - Husqvarna 701 Enduro 2017 Repair Manual

9 SHOCK ABSORBER, SWINGARM
56
9.15 Disassembling the piston rod
Preparatory work
- Remove the spring. (S® p. 54)
- Dismantle the damper. (Ki p. 54)
Main work
- Clamp the piston rod with the heim joint in a vise.
- Remove nut O-
©
[
300540-10
Remove supporting plate
0
and rebound shim stack
©
together with
piston ©.
©
Info
Thread the rebound shim set on a screwdriver and set the parts down
together.
I ©
O
300541-10
Remove compression shim stack
©
with supporting plate
©
©
Info
Thread the compression shim stack on a screwdriver and set the parts
down together.
I
I9
©
200572-11
Remove seal ring retainer ©.
o
t a
4 /TlMfc
300542-10
Remove locking cap © and rubber buffer
©
©
I ►
©
300543-10