Checking The Clutch - Husqvarna 701 Enduro 2017 Repair Manual

19 CLUTCH
226
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
Remove screws O ■
Remove cover
©
with membrane
©
Fill bleeding syringe © with the appropriate hydraulic fluid.
W o
i
&
mm
©
Bleed syringe (50329050000) (!> p. 320)
0
Brake fluid DOT 4 (S3 p. 316)
On the clutch slave cylinder, remove bleeder screw
©
and mount bleeding
syringe ©.
Inject the liquid into the system until it escapes from drill hole
©
of the master
cylinder without bubbles.
Now and then, extract fluid from the master cylinder reservoir to prevent overflow.
Remove the bleeding syringe. Mount and tighten screws bleeder screw.
Correct the fluid level of the hydraulic clutch.
Guideline
i
O
u
0
Fluid level below container rim 4 mm (0.16 in)
Position the cover with the membrane. Mount and tighten the screws.
202086-10
Checking the clutch
19.3
Main work
- Lay vehicle on the side.
Info
Cover the components to protect them against damage.
I
i
>
R01429-10
Remove screw Q.
USE 0N'i-t
flU-RW
f
!
(Jjjr
R01430-10
__
Remove screws
©
Hang the footrest bracket to the side.
----------- T-
&
Info
Cover the components to protect them against damage.
I
A
AO
0
R01431-10
Remove screws
®
Take off oil filter cover © with O-ring and hang to the side.
StOKtY
HL-RAT
m
o
J".
R01432-10