Installing The Spacer And Spring; Installing The Clutch Cover; Installing The Ignition Pulse Generator - Husqvarna 701 Enduro 2017 Repair Manual

18 ENGINE
209
Remove special tool
©
Assembly screws (75029033000) (^8 p. 325)
R £%,
0 f
Is.
A'
. *
m
0
,
rm
IS
r
311777-11
18.5.11 Installing the spacer and spring
Position spacer © and spring ©.
• >
*
Uv
a
:
jx
\ \ V*
4^;
T
\
1A:
Jr
& m
311776-10
18.5.12 Installing the clutch cover
Mount dowels O and position the clutch cover gasket
©
©
'
•{<'
:
• rf ^
O I
y
311774-11
Position the clutch cover.
Mount screws
0
but do not tighten yet.
Guideline
©
As,
Screw, clutch cover 10 Nm (7.4 Ibf ft) M6x30
• « i©
Mount screw © but do not tighten it yet.
Guideline
©
K s
©
Screw, clutch cover M6x35 10 Nm (7.4 Ibf ft)
D02698-10
Mount screws
0
and tighten all screws in a crisscross pattern.
Guideline
Screw, clutch cover 10 Nm (7.4 Ibf ft) M6x25
18.5.13 Installing the ignition pulse generator
T Position the ignition pulse generator.
Mount screws O but do not tighten yet.
Guideline
EB
^—r
m S©
m
Loctite® 243™ Screw, ignition pulse gen­
erator
M6 10 Nm
(7.4 Ibf ft)
v*
Position the cable and position cable sleeve
0
in the engine case.
>.
i
>
311772-10