Changing The Fuel Pump - Husqvarna 701 Enduro 2017 Repair Manual

Hide thumbs Also See for 701 Enduro 2017:
Table of Contents

Advertisement

12 FUEL TANK, SEAT, TRIM
92
Position the rear end.
Mount and tighten screws
©
on both sides.
Guideline
©
©
V
Loctite® 243™
Screw, fuel tank, bottom
M8
25 Nm
(18.4 Ibf ft)
5
^ i
. © {Z
D02751 -10
Mount the cable ties.
v
&
& ©]
r
D02824-10
Mount and tighten screws O-
Guideline
O
Screw, main silencer holder on fuel
tank
25 Nm (18.4 Ibf ft)
M8
1
D02749-10
Finishing work
-
Install the rear right side cover. (8JS p. 84)
-
Install the rear left side cover. (8® p. 85)
-
Fit the rear fairing. (iS p. 86)
-
Install the air filter box. (iS p. 80)
-
Mount the side cover. (SI p. 83)
-
Connect the battery. ( p. 120)
-
Mount the seat. (Si p. 83)
-
Set the clock. (W p. 139)
12.16 Changing the fuel pump
Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
A
Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.
Switch off the engine for refueling.
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
If any fuel is spilled, wipe it off immediately.
Observe the specifications for refueling.

Advertisement

Table of Contents
loading

This manual is also suitable for:

3403054en

Table of Contents