Table of Contents
Advertisement
9 SHOCK ABSORBER, SWINGARM
60
Mount supporting plate
©
with the rounded side facing downward.
Mount the compression shim stack
©
with the smaller shims facing downward.
©
1
aft
©
200572-11
Sand both sides of the piston on a surface plate using 1200-grit sandpaper.
Clean the piston.
Assemble the piston.
Guideline
©
View ©
Piston from above
©
©
View ©
IP
Piston from below
ii
201270-10
Mount the rebound shim stack © with the smaller shims facing upward.
Install supporting plate ©.
©
O
300541-11
Mount and tighten nut
©
Guideline
©
40 Nm (29.5 Ibf ft)
Piston rod nut
M12x1
300540-11
9.20
Assembling the damper
Preparatory work
-
Check the damper, (ill p. 57)
-
Assemble the piston rod. (8S p. 59)
Advertisement
Table of Contents
