Disassembling The Countershaft; Checking The Transmission - Husqvarna 701 Enduro 2017 Repair Manual

18 ENGINE
196
18.4.35 Disassembling the countershaft
©
©
©
©
©
£
©
0 i
<©
©
©
0
©
J
©
:
© ©
©
i
©
©
0
©
311920-10
Secure the countershaft in the bench vise with the toothed end facing downward.
Guideline
Use soft jaws.
Remove stop disk O and first-gear idler gear
©
Remove needle bearing
©
and stop disk ©.
Remove fifth-gear sliding gear
©
and lock ring
©
Info
Open the lock ring with a screwdriver and twist it off the transmission shaft with pliers.
I
Remove stop disk © and third-gear idler gear ©.
Remove needle bearing
®
and fourth-gear idler gear ©.
Remove needle bearing
©
and stop disk
©
Remove lock ring
©
and sixth-gear sliding gear
©
Remove lock ring
©
and stop disk
©
Remove second-gear idler gear
©
and needle bearing ©.
18.4.36 Checking the transmission
Condition
The transmission has been disassembled.