Table of Contents
Advertisement
6 FORK, TRIPLE CLAMP
20
Unclamp the fork leg.
Slide the outer tube down. Drain the fork oil.
201702-10
Clamp the fork leg with the axle clamp.
Release hydrostop unit
©
and remove it.
©
v
V
Info
Do not use an impact wrench.
Place a pan underneath since oil will run out.
I
0
R00015-10
Remove the cartridge from the fork leg.
Press-out tool (T14051) (IP p. 334)
% J
Info
Removing the O-ring seat from the cartridge usually requires the applica
tion of considerable force.
I
R00016-10
Remove dust boot
0
Remove fork protector ring
©
©
©
Info
The fork protector ring does not necessarily need to be removed for repair
work.
I
B03520-14
Remove lock ring ©.
Info
The lock ring has a beveled end where a screwdriver can be applied.
I
©
B03527-11
Warm up outer tube in area © of the lower sliding bushing.
Guideline
©
50 °C (122 °F)
©
Pull the outer tube from the inner tube with a jerk.
Info
Lower sliding bushing © must be pulled from its bearing seat.
I
B03528-13
Advertisement
Table of Contents
