Husqvarna 701 Enduro 2017 Repair Manual page 66

9 SHOCK ABSORBER, SWINGARM
64
When the pressure gauge reaches the specified value, turn the Damper ©
trol lever to Vacuum.
Guideline
con-
Chock all oil lovol rgulnrly!
TBT
o
Closed
Vacuum
Pressure
3 bar
S The pressure gauge falls to the specified value.
Vacuum Open
Equalize
pressure
0 bar
External
tank
Damper Oil
reservoir
200269-10
When the pressure gauge reaches the specified value, turn the Oil reservoir
©
control lever to Vacuum.
Guideline
©
u
/
Closed
Pressure iVacuum
0 bar
S The vacuum gauge falls to the specified value.
Open Vacuum Equalize
pressure
4 mbar
External
tank
Damper Oil
reservoir
200270-10
When the vacuum pressure gauge reaches the specified value, turn the Oil reser­
voir control lever
©
to Equalize Pressure.
Guideline
•Chock all oil I overt* regularly!
©
Closed
Pressure
Vacuum
4 mbar
S The pressure gauge falls to the specified value.
Vacuum Open
Equalize
pressure
0 bar
External
tank
Damper Oil
reservoir
200267-10
^^Chcel^l^lMovel^ogularlyr r
v
-t
When the pressure gauge reaches the specified value, turn the Damper control
lever © to Pressure.
Guideline
m </
Closed
Vacuum
0 bar
S Oil is pumped into the damper.
S The pressure gauge rises to the specified value.
Vacuum Open Equalize
pressure
External
tank
Damper Oil
reservoir
3 bar
200268-10
When the pressure gauge reaches the specified value, turn the Damper ©
trol lever to Vacuum.
Guideline
S T77
con-
-Chcck all oil Involn regularly!
©
Closed
Pressure Vacuum
3 bar
S The pressure gauge falls to the specified value.
Vacuum Open
Equalize
pressure
0 bar
External
tank
Damper Oil
reservoir
When the pressure gauge reaches the specified value, operate the On/Off switch.
Guideline
200269-10
0 bar
S The vacuum pump is switched off.
Slide O-ring © to the end of the special tool by the specified value (distance
o
minus specified value).
Guideline
FI
10 mm
PH
Depth micrometer (T107S) (SH p. 332)
©
Slide the floating piston into the reservoir to the shortened position using the spe­
cial tool.
©
1
m
I
201284-