Model Number And Model Differences - Epson E2C Series Manipulator Manual

Setup & Operation 2. Specifications

2.2 Model Number and Model Differences

E2C Series Model Number
E2C 25
E2C 35
When the manual conveys information that applies to all models regardless of "Joint #3
stroke" or "Arm length", asterisks "*" are used in the model number.
Example : E2C***S
The "-UL" is indicated in this manual only when the specifications of UL1740
conformance type are different from those of nonconformance type.
Figures in this manual are for the UL1740 conformance type.
10
1 -UL
With "-UL"
Without "-UL" : UL1740 nonconformance
Type
S
C
Joint #3 stroke
1
Arm length
25 : 250 mm
1 -UL
With "-UL"
Without "-UL" : UL1740 nonconformance
Type
S
C
SM : Multiple Mounting Standard-model
CM : Multiple Mounting Cleanroom-model
Joint #3 stroke
1
Arm length
35 : 350 mm
(This model number means that the Manipulator is E2C series Table Top
Standard-model corresponding to all arm lengths.)
: UL1740 conformance
: Table Top Standard-model
: Table Top Cleanroom-model
Type is S : 120 mm
Type is C : 100 mm
: UL1740 conformance
: Table Top Standard-model
: Table Top Cleanroom-model
Type is S or SM : 120 mm
Type is C or CM : 100 mm
E2C Rev.6