NEC NEAX 2400 ICS Features Manual page 116

C-2
Service Conditions (cont'd)
8. If all the stations in the terminating Hunt Group are busy, the calling party will hear Busy Tone
and will not return to the called parties Hunt Group.
9. When MULTIPLE CALL FORWARDING - BUSY LINE [M-24] service is activated, hunting will be
performed at the last destination of the forwarded call, even though the multiple jumped stations
are in a Hunt Group.
10. When the pilot station of a STATION HUNTING [S-7, 8, 9] Group activates CALL FORWARDING
- BUSY LINE to a station (not a member of a Hunt Group) and system parameters specify that
call hunting will be activated at the forwarded station, the NEAX2400 ICS will send Busy Tone if
the forwarded station is busy. If the system parameters specify hunting at the forwarding station,
and the forwarded station is busy, the call will hunt in the forwarding stations Hunt Group.
11. When a station CALL FORWARDS - ALL CALLS [C-5] to a pilot in a STATION HUNTING [S-7,
8, 9] Group and the pilot activates CALL FORWARD - BUSY LINE to another station, if system
parameters define the call to hunt to the forwarded Hunt Group and all stations are busy, the
calling party will hunt at the called stations Hunt Group. If system parameters define the call to
hunt to the forwarding Hunt Group and all stations are busy, the calling party will then hunt to the
forwarding stations Hunt Group.
12. If the called station is the pilot of a UCD [U-1] group and activates CALL FORWARDING - BUSY
LINE, the calling station will queue to the UCD [U-1] group and will not Call Forward.
13. If a calling station, ATTENDANT CONSOLE [A-3], or trunk receives a Busy Tone after being
CALL FORWARDED-BUSY and activates EXECUTIVE RIGHT-OF-WAY [E-1], CALL
WAITING-ORIGINATING
VERIFICATION [B-3], these services will be activated to the calling station.
14. There is no limitation to the number of stations that can set CALL FORWARDING - BUSY LINE
simultaneously.
15. The operator answering a Call Forwarded call can identify the called station number on the
ATTENDANT CONSOLE [A-3] display.
16. When a station user places a call to a busy station which has been set CALL FORWARDING-
BUSY LINE [C-2], the calling party can override the call forwarding feature, activating service
features associated with "busy" status such as CALL BACK [C-1], EXECUTIVE RIGHT-OF-WAY
[E-1], STEP CALLS [S-13], provided that the service feature class (SFC) of the calling party
permits this feature. Otherwise, the call is forwarded to a predetermined destination as usual.
Programming of this feature:
ASFC - DAY / NIGHT
TN:
SFI:
SFC: Service Feature Class
RES: 1(Allowed)
17. The OAI monitor number and the ACD pilot number cannot be assigned as the Call Forwarding
target station number except when called from a station or a tie line trunk.
18. (Series 6100 software enhancement) When a call terminates to a busy station setting CALL
FORWARDING - BUSY LINE, depending on the calling station service restriction class, it can be
selected to make the station busy (not to activate CALL FORWARDING - BUSY LINE) and to
activate such services as ATTENDANT CAMP-ON [A-1], BUSY VERIFICATION [B-3], CALL
WAITING - TERMINATING [C-12], STEP CALL [S-13], etc.
Page 86
Call Forwarding - Busy Line
[C-31], CALL
Tenant Number
128 (Service selection for a busy station with Call Forwarding - Busy Line
service)
WAITING-TERMINATING
NEAX2400 ICS Business Features and Specifications
[C-12] or BUSY
NDA-24143, Issue 4