Table of Contents
Advertisement
A-59
General Description
This feature allows the Attendant, via the ATTENDANT CONSOLE [A-3], to hear a prearranged
announcement when the Attendant dials a predetermined access code.
Operating Procedure
To access:
1.
Press an idle loop key.
2.
Dial the announcement trunk access code.
3.
Listen to the message from announcement machine.
Service Conditions
1.
This feature requires one of the following hardware alternatives:
a.) Central Office Trunk (COT) or 2W E&M Trunk and announcement machine.
b.) Digital Announcement Trunk (DAT).
2.
The following connections are available:
a.) multi-connection: several Attendants can connect to one announcement trunk at the
same time.
b.) single connection: one Attendant can connect to one announcement trunk at a time.
3.
This connection can be continuous until the Attendant presses the "CNCL" key or can be
discontinued after 30 seconds. This function can be selected on a per-announcement trunk, and
per-tenant basis.
4.
Before connection to the announcement machine is made, the system can be programmed to
return Ringback Tone. This is selected on a per-tenant and per-announcement basis.
5.
This service can be provided for a maximum of 127 announcements per-tenant, which includes
the announcement trunks for:
ANNOUNCEMENT SERVICE
CALL FORWARDING - ALL CALLS - ANNOUNCEMENT [C-69]
CALL FORWARDING - INTERCEPT/ANNOUNCEMENT [C-25]
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Announcement Service - Attendant
Announcement Service - Attendant
[A-15]
A-59
Page 39
Advertisement
Table of Contents
