Table of Contents
Advertisement
P-57
General Description
This feature temporarily restricts telephones from making unauthorized calls by dialing special access
code when station users are away from their seats.
Operating Procedure
To set PAD LOCK from the station:
1.
Lift the handset and receive dial tone.
2.
Dial PAD LOCK access code and receive special dial tone.
3.
Dial Authorization Code and receive service set tone.
4.
Restore the handset.
To cancel PAD LOCK from the station.
1.
Lift the handset and receive dial tone.
2.
Dial PAD LOCK cancel code and receive special dial tone.
3.
Dial Authorization Code and receive service set tone.
4.
Restore the handset.
Service Conditions
1.
Conversion of Service Feature Restriction Class is not available.
2.
This feature restricts telephones from making C.O. outgoing calls and/or terminating calls from
C.O. trunks, stations, and attendant consoles. Stations in Pad Lock status are able to place
station-to-station calls and outgoing calls using attendant assisted calling.
3.
If the station under Pad Lock status dials a C.O. line access code, the station is rerouted to one
of the following:
a.) Reorder tone
b.) Attendant Console
4.
Calls to stations in PAD LOCK status will receive reorder tone or, on a tenant basis, can be
assigned to transfer to the Attendant Console.
5.
PAD LOCK status will continue unless it is cancelled.
6.
Stations are assigned this feature via Class of Service.
7.
This feature is set or cancelled from the station only. The Attendant Console cannot set or cancel
this feature.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Pad Lock
Pad Lock
(Series 6200 software feature)
P-57
Page 427
Advertisement
Table of Contents
