Table of Contents
Advertisement
L-28
Interactions
1.
A maximum of 16 LDNs can be assigned per tenant, each with its own separate destination
station. The same destination may also be used for all LDNs.
2.
STATION HUNTING-CIRCULAR [S-7] and STATION HUNTING-TERMINAL [S-9] are valid from
the night transfer destination station.
3.
MULTIPLE CALL FORWARDING-ALL, BUSY, DON'T ANSWER [M-44, M-24, M-25] and
MULTIPLE CALL FORWARDING-ALL, BUSY, DON'T ANSWER-CCIS [M-40, M-41, M-42] are
valid from Night transfer destination station.
4.
An incoming DID call will get Busy Tone if the Night transfer destination station is CALL
FORWARDING-ALL [C-5] or CALL FORWARDING-BUSY LINE [C-2] to the Attendant, and
TRUNK ANSWER FROM ANY STATION [T-8] is not service.
5.
An incoming DID call will ring at the Night transfer destination station if CALL FORWARDING-
DON'T ANSWER [C-3] is set to the Attendant.
6.
There is no restriction check for LDN NIGHT CONNECTION destination stations. The station
can be totally restricted from receiving incoming calls and still receive LDN NIGHT
CONNECTION calls.
7.
If the Night transfer destination station is busy, LDN calls will go into queue.
8.
If the system is switched to Day mode while LDN calls are in queue, only those calls that are in
queue will be redirected to the Attendant. LDN calls that are ringing the Night transfer destination
station will continue to ring that station and will not be redirected to the Attendant.
9.
If the Night transfer destination station is in the Make Busy state (MBST Command = 1 for that
station) or is in LINE LOCKOUT [L-3], the LDN call will go to TRUNK ANSWER FROM ANY
STATION [T-8].
10. If the Night transfer destination station (station A) is in CALL FORWARDING-BUSY LINE [C-2]
to station B and both stations (station A and station B) are busy, the incoming LDN call will queue
to both station A and station B, and will ring the first idle station.
11. If the Night transfer destination (station A) is in CALL FORWARDING-BUSY LINE [C-2] over
CCIS to station C in the remote office, and both station A and station C are busy, Busy Tone is
returned to the incoming LDN calling party.
12. Incoming LDN calls to a Night transfer destination station that has set CALL FORWARDING-ALL
CALLS, BUSY LINE, DON'T ANSWER-CCIS [C-45, C-46, C-47] over CCIS to a busy UCD group
in the remote office will queue to that group, and will activate the CALL WAITING LAMP-UCD
[C-76], if programmed.
Page 304
LDN Night Connection
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
