Table of Contents
Advertisement
S-11
S-11
General Description
This feature permits any station user to directly dial another station within the NEAX2400 ICS system
without operator assistance.
Operating Procedure
To operate:
1.
Lift the handset; receive Dial Tone.
2.
Dial the desired station number.
Service Conditions
1.
If the called station is off-hook, the originating station receives a Busy Tone. Otherwise, the
called station will ring and the caller will hear a Ringback Tone.
2.
If the called station remains unanswered for longer than a preset interval, the call will not be
transferred to the ATTENDANT CONSOLE [A-3], unless CALL FORWARDING-DON'T
ANSWER [C-3] is provided.
3.
If the called station is busy, the call will not be transferred to the Attendant Console, unless CALL
FORWARDING-BUSY LINE [C-2] is provided.
4.
Station-to-station calling between TENANTs [T-12], will not be restricted, unless programming
for such restriction is entered in System Data.
5.
The maximum number of digits per station number is 5.
6.
The same station numbers cannot be duplicated in different TENANT [T-12] groups.
7.
Calling Party Release/Called Party Release/Both Party Release/First Party Release can be
selected on a system basis.
8.
The following features, if activated, may result in the calling station user to be connected to a
station other than the dialed station:
CALL FORWARDING - ALL CALLS/BUSY/DON'T ANSWER
CALL PICKUP
STATION HUNTING
UCD
9.
When HOT LINE [H-1] service is provided, the calling station user automatically connects to a
preset number by going off-hook. The preset number may be another station, an Attendant, or
an outside party.
10. When the calling station user dials an unassigned station number, the call will be routed to
Reorder Tone or Announcement (option).
11. An option per station line is available to eliminate the STATION 5dB PAD [S-62].
Interactions
1.
The ATNR command is required for all station-to-station calling.
2.
The normal 5 dB PAD loss inserted for station-to-station calling may be eliminated on a per-
station basis. For these stations, assign a Service Feature Class that allows SFI 50, Removal of
5dB pad for Off-Premises Extensions (OPX).
Page 468
Station-to-Station Calling
Station-to-Station Calling
[C-5, 2, 3]
[C-7, 30]
[S-7, 8, 9]
[U-1]
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
