Table of Contents
Advertisement
Interactions (cont'd)
4.
NIGHT CONNECTION - FLEXIBLE/FIXED [N-1, 2] with TAS [T-8] feature not active: When the
Night Station is in a lock-out state, calls directed to the Night Station will receive Ringback Tone.
If the TAS [T-8] feature is active, calls are directed to the Night Bell.
5.
CALL WAITING [C-12, 31]: Call Waiting cannot be activated on a station in lock-out. The calling
party will receive Reorder Tone.
6.
CALL HOLD [C-6]: From a Special Dial Tone state, LINE lock-out will occur if a station user
attempting to place a station on hold dials the CALL HOLD [C-6] access code and partially dials
any number. The sequence prior to lock-out is: interdigit time-out for 6 seconds, Reorder Tone
for 30 seconds, optional Howler Tone for 30 seconds. When the station in lock-out goes on-hook,
it will be rung by the station on hold. The Busy Lamp Field will not flash
7.
EXECUTIVE RIGHT-OF-WAY [E-1]: Reorder Tone will be returned to a calling party that is
attempting Executive Override toward a station in lock-out.
8.
THREE-WAY CALLING [T-2]: An attempt to establish a Three-Way Conference with a station in
lock-out will result in the Reorder Tone being returned to the station user making the attempt.
The station user can return to the station on hold by switchhook flashing.
9.
With the following calls, when a station user fails to hang up after the other party has
disconnected, the station will be placed in a lock-out condition after a 30-second Reorder Tone
(time-out), optional 30-second Howler Tone warning (time-out):
DIRECT INWARD DIALING (DID) call
STATION-TO-STATION call
Trunk-to-Station call
Attendant-to-Station call
10. CALL BACK [C-1]: To activate Call Back, the station user dials the appropriate access code after
reaching a busy station. If the user fails to go on-hook within 30 seconds after receiving Service
Set Tone, LINE lock-out will occur. The sequence prior to lock-out is: Service Set Tone for 30
seconds, Reorder Tone for 30 seconds, optional Howler Tone warning for 30 seconds. Call Back
cannot be activated toward a station in lock-out.
11. CALL WAITING - ORIGINATING [C-31]: If a station user fails to complete dialing of the access
code while attempting to activate CALL WAITING - ORIGINATING [C-31], LINE lock-out will
occur.
12. A station in LINE lock-out will be restored to service when the station user goes on-hook for 280
milliseconds or more.
13. MESSAGE REMINDER [M-19D]: A Message Reminder cannot be sent to a station in LINE lock-
out.
14. ATTENDANT NIGHT TRANSFER [A-19] is not available if the Night Transfer Station is in LINE
lockout. The caller will hear Ring Back Tone then Reorder Tone.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Line Lockout
[D-8]
[S-11]
L-3
Page 285
Advertisement
Table of Contents
