Table of Contents
Advertisement
Service Conditions (cont'd)
8.
When transferring a call from a station or trunk (second party) to another station (third party) the
control station can transfer the call during ringing. When the control station goes on-hook, the
station or trunk on hold is connected to the third party and hears Ringback Tone. A variable timer
is set when the controlling station goes on-hook. If the timer times out before the third party
answers, the control station is rung back. When transferring a call from a loop start DIT trunk,
the trunk is disconnected if the timer times out before the third party answers.
9.
Reorder Tone is returned to the station user when the following actions occur:
a.) the user's line is restricted by outward or miscellaneous trunk restrictions by the class of
service,
b.) the user dials the number of an unequipped line or termination is restricted (route
restrictions),
c.) the user dials an invalid first digit.
10. When transferring a call from a station or trunk (second party) to another station (third party), the
control station can hang-up during ringing. If the third party's line is busy, the control station will
be rung back right away and if the third party does not answer the phone in time (30 seconds),
the control station will be rung back after the time expires. In the case of transferring the call from
a loop start DIT trunk, if the third party does not answer before the time goes up, the trunk will
be disconnected.
Interactions
1.
This feature is denied whenever the transferring station is engaged in any state other than a
simple two-party connection.
2.
See TRUNK-TO-TRUNK CONNECTION
transferred off network.
3.
If a station is in an established THREE-WAY CALLING [T-2] connection, that station cannot
activate any features. If a station switchhook flashes to activate a feature, the flash is ignored
and the three-way connection remains established.
4.
Features that cannot be activated if a party is involved in a CONSULTATION HOLD [C-17, 17D]
or in an established THREE-WAY CONFERENCE [T-2] connection are:
ATTENDANT CAMP-ON WITH TONE INDICATION[A-1]
ATTENDANT OVERRIDE
BOSS-SECRETARY OVERRIDE - D
BUSY VERIFICATION
CALL BACK
CALL FORWARDING (Activate or Cancel)
CALL PICKUP-DIRECT
CALL WAITING - TERMINATING
EXECUTIVE RIGHT-OF-WAY
MESSAGE REMINDER
OUTGOING TRUNK QUEUING Cancel
SPEED CALLING-STATION Entry
TRUNK ANSWER FROM ANY STATION (TAS)
5.
Upon establishing a CONSULTATION HOLD [C-17, 17D] connection and dialing a third party, if
the station user receives Busy or Reorder Tone instead of Ringback Tone, the station user
flashes once to disconnect the tone and reconnect the second party.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Call Transfer - All Calls
[T-10]
for additional programming if the call is to be
term
[A-7]
[B-5D]
[B-3]
[C-1]
[C-2, 3, 5]
[C-30]
[C-12]
[E-1, E-1D]
[M-19D]
[O-2]
[S-21]
[T-8]
C-11
Page 127
Advertisement
Table of Contents
