Call Waiting Lamp - NEC NEAX 2400 ICS Features Manual

C-13
General Description
This feature provides a visual indication to the Attendant when one or more calls are waiting to be
answered.
Operating Procedure
Refer to NEAX2400 ICS Command Manual.
Service Conditions
1. All incoming calls to the ATTENDANT CONSOLE [A-3] that have to be answered will signal the
Attendant via the CALL WAITING LAMP.
2. The CALL WAITING LAMP can be set to flash at 60IPM only after "X" number of calls are waiting.
"X" can be anywhere from 1 to 15 calls waiting per TENANT [T-12].
3. In the case of MULTIPLE CONSOLE OPERATION [M-4], the CALL WAITING LAMP will light on
all consoles until one of the positions has processed the call(s).
4. Where TENANT SERVICE [T-12] is provided, the CALL WAITING LAMP will light only on the
console(s) of the called tenant.
5. In addition to the CALL WAITING LAMP indication, each console is provided with a two-digit
display that shows the number of calls waiting.
Interactions
1. The CALL WAITING LAMP lights if any of the following incoming calls are waiting to be
answered at the ATTENDANT CONSOLE [A-3]:
LDN
ATND
RCL
FX
WATS
TIE
BSY
NANS
TF
ICPT
CCSA
2. In addition to the CALL WAITING LAMP, an audible buzzer is sounded whenever a call is waiting
and the Attendant is available to answer calls. The buzzer volume can be adjusted and silenced
by operation of a Volume Control key. If the Attendant is on a loop, a buzzer can be activated.
3. An indication of the type of calls waiting is given by the INCOMING CALL IDENTIFICATION
[I-2] feature.
4. When TENANT SERVICE [T-12] is used, the CALL WAITING LAMP will flash only on the
console(s) assigned to the called Tenant. The Tenant console is assigned in ATRK. The Route
of the Tenants of the individual trunks are assigned in ATRK as well.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4

Call Waiting Lamp

Call Waiting Lamp
(Listed Directory Number)
(Attendant Dial "0" Calls, CALL FORWARDING - ALL CALLS [C-5])
(Attendant Recall Calls)
(Foreign Exchange)
(Wide Area Telephone Service)
(TIE Line Calls)
(Call Forwarding - Busy Line to Attendant)
(Call Forwarding - Don't Answer to Attendant)
(Inter Position Transfer)
(Call Forwarding - Intercept)
(Common Channel Switching Arrangement)
C-13
Page 135