NEC NEAX 2400 ICS Features Manual page 378

M-44
Service Conditions (cont'd)
Type of call
Call from station
Call from trunk
c.) If the call is forwarded by CALL FORWARDING - DON'T ANSWER [C-3] at any point in
a forwarding sequence, the "NANS" key on the Attendant Console will light, even if the
call status of the originally called station is CALL FORWARDING - ALL CALLS or CALL
FORWARDING - BUSY LINE.
d.) Called Number Display is only provided if a call is forwarded to the Attendant Console by
CALL FORWARDING - ALL CALLS [C-5] or by CALL FORWARDING - BUSY LINE [C-2].
9. Forwarding to a D
a.) The calling D
number of the station being called on the right. The display on the ringing D
the number of the originally called station on the left, and the number of the calling
station on the right.
b.) The forward status of the originally called station is shown on the far left of each D
display: FDB for CALL FORWARDING - BUSY LINE [C-2]; FDA for CALL
FORWARDING - ALL CALLS [C-5].
10. UCD Groups:
a.) If the destination of a CALL FORWARDING - ALL CALLS [C-5], CALL FORWARDING -
BUSY LINE [C-2], or CALL FORWARDING - DON'T ANSWER [C-3] is a UNIFORM
CALL DISTRIBUTION (UCD) [U-1] group control station, and CALL FORWARDING -
ALL CALLS [C-5] is not set at that station, the call will be forwarded according to UCD
[U-1] procedures.
b.) In the UCD procedure, if CALL FORWARDING - ALL CALLS [C-5] is set on a station in
the group, that station is skipped.
11. Hunting:
a.) If the final destination station is busy, or if some condition prevents the call from being
forwarded, a busy line is selected, and a hunting check is performed.
Page 348
Multiple Call Forwarding - All Calls
Forwarding Status Of Originally Called Station
Call Forward - All
Calls
ATND
Depends on trunk
class
term
:
term
's display will show the number of the called station on the left, and the
Call Forward - Busy
BUSY
BUSY
NEAX2400 ICS Business Features and Specifications
Call Forward - Don't
Answer
NANS
NANS
term
will show
term
's
NDA-24143, Issue 4