L-6D Last Number Called - D Term - NEC NEAX 2400 ICS Features Manual

L-6D
L-6D
General Description
This feature allows the user of a D
pressing the "LNR/SPD" key. With this feature, the D
5 calls that have been stored in the memory of the system, thus enabling the user to place a call without
redialing the full number.
Operating Procedure
1. How to check the dialed numbers stored in the memory (up to 5 destinations):
a.) Press the LINE/SPD key on a D
•
•
•
term
D Series E
b.) Press the LINE/SPD key on the D
•
•
•
term
D Series E
Note: The indication on the display is changed in sequence by pressing the LINE/SPD key. Once the stored
telephone number display reaches "LNR[#]/SPD[ ]-5", "LNR[#]/SPD[ ]-1" appears again by pressing the
LINE/SPD key.
Page 290
Last Number Called - D
Last Number Called - D
term
to store the last five numbers dialed, and to redial the numbers by
The Prime Line lights green.
The Speaker Lamp lights green.
Receive Dial Tone from the speaker with the following display on the D
LNR [#] / SPD [_ _] - 1
LNR [*] / SPD [_ _ _] - 1
MIC FDB
The Prime Line lights green.
The Speaker Lamp lights green.
Receive Dial Tone from the speaker with the following display on the D
LNR [#] / SPD [_ _] - 2
LNR [*] / SPD [_ _ _] - 2
MIC FDB
term
term
user can choose any destination out of the latest
term
.
811625643
811625643
FDN
term
again.
25191
25191
FDN
NEAX2400 ICS Business Features and Specifications
term
>>>
>>>
NDA-24143, Issue 4
term.
.
term
.