Executive Right-Of-Way - NEC NEAX 2400 ICS Features Manual

E-1
General Description
This feature enables selected station users, upon encountering a busy condition at an internal station, to
bridge into the busy connection.
Operating Procedure
To enter a busy connection:
1. Dial the busy station; receive Busy Tone.
2. Switchhook flash; receive Special Dial Tone.
3. Dial the EXECUTIVE RIGHT-OF-WAY access code; warning tone is sent.
4. The calling station is now bridged into a three-way call.
Service Conditions
1. Two tone bursts of .08 second duration are transmitted upon activation of this feature to alert the
connected parties that an executive override connection is being made.
2. The LCD display on the interrupted party's D
STATION NUMBER DISPLAY - D
3. EXECUTIVE RIGHT-OF-WAY is denied if the busy station is:
a.) dialing or in a LINE LOCKOUT [L-3] state
b.) listening to a tone
c.) being rung
d.) protected from override via CLASS OF SERVICE - INDIVIDUAL [C-15]
e.) being connected to an ATTENDANT CONSOLE [A-3] loop
f.) activating a conflicting feature, such as:
ATTENDANT OVERRIDE
BOSS - SECRETARY OVERRIDE - D
BUSY VERIFICATION
CALL HOLD
CALL TRANSFER
CALL WAITING - ORIGINATING
CALL WAITING - TERMINATING
CONSULTATION HOLD - ALL CALLS
DATA LINE SECURITY
DATA PRIVACY ON DEMAND
DIAL ACCESS TO ATTENDANT
EXCLUSIVE HOLD - D
MODEM POOLING
NON-EXCLUSIVE HOLD - D
OFF-HOOK QUEUING
OUTGOING TRUNK QUEUING
PRIVACY - D
PRIVACY RELEASE
THREE-WAY CALLING
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4

Executive Right-of-Way

Executive Right-of-Way
term
[I-10D] has been programmed in System Data.
term
term
term
term
will give an indication only if INTERMEDIATE
[A-7]
term
[B-5, B5-D]
[B-3, B-9]
[C-6, C-6D]
[C-10, C-11, C-50, C-54]
[C-31]
[C-12]
[C-17, C-58]
[D-12, D-66]
[D-17, D-68]
[D-2, D-71]
[E-4D]
[M-21]
[N-7D]
[O-7, O-11]
[O-2, O-2D]
[P-14D]
[P-18]
[T-2, T-2D]
E-1
Page 235