Intercom Calling - NEC NEAX 2400 ICS Features Manual

I-9
I-9
General Description
This feature allows a sub-line appearance, assigned to a D
Operating Procedure
To originate an intercom call:
1. Press the Intercom sub-line appearance.
2. Lift the handset or press the "SPKR" key; Dial Tone is heard.
3. Dial an Intercom station, receive Ringback Tone. The display will show:
term
D Series E
4. The called party answers and the conversation begins.
To answer an Intercom call:
1. Ringing is heard from the Intercom sub-line.
2. Press the Intercom sub-line appearance. The display will show:
term
D Series E
3. Lift the handset or press the SPKR key.
4. The conversation can then begin.
Service Conditions
1. An Intercom sub-line appearance cannot be the Prime Line of a D
2. An Intercom sub-line appearance cannot call any station or trunk in a system other than another
Intercom sub-line appearance.
3. An Intercom sub-line appearance cannot activate any features.
4. An Intercom sub-line appearance must be assigned as a Software Line Appearance.
5. This feature is only available for D
6. Intercom sub-lines must be allowed the service feature restriction of SFI=70.
Page 276

Intercom Calling

Intercom Calling
ICM
(Time Display)
ICM
(Time Display)
ICM
(Time Display)
ICM
(Time Display)
term
s.
term
, to be used for INTERCOM CALLING.
XXXX
XXXX
XXXX
XXXX
term
.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4