Table of Contents
Advertisement
Service Conditions (cont'd)
term
3.
A D
can be assigned to only one CALL PICKUP GROUP [C-7]. This assignment is
programmed via the D
appearance on the D
4.
A maximum of 50 stations can be assigned to one group per system. A maximum of 20 stations
per group may be assigned to all other groups. There is no limit to the amount of groups per
system.
5.
If CALL PICKUP GROUP - D
ringing, the system will connect the calls in the order of priority assigned to the call pickup chain.
6.
CALL PICKUP GROUP - D
2], Recall or CALLBACK [C-1] from another station.
7.
CALL TRANSFER – ALL CALLS: The capability to pick up the recall of CALL TRANSFER – ALL
CALLS when CALL PICKUP – GROUP is activated is not available.
8.
(Series 6200 software enhancement) A maximum 50 of stations can be assigned to each
EXPANDED CALL PICKUP GROUP. There is no limit to the number of Groups per system.
9.
(Series 6200 software enhancement) A station user cannot pickup a call in the EXPANDED
CALL PICKUP GROUP when engaged in another call.
Interactions
1.
CALL HOLD [C-6]: To pick up a call while engaged in a two-party connection, the station can
switchhook flash to place the other party on CALL HOLD and dial the Call Pickup code. First
party is put on Hold.
2.
CALL BACK [C-1]: The CALL BACK station originator being called back cannot be picked up by
a station with the Call Pickup Group feature. If the CALL BACK is directed to the terminating
station, then Call Pickup Group may be used to answer the call. Any other station attempting to
pick up the call will result in the station user receiving Reorder Tone.
3.
OUTGOING TRUNK QUEUING [O-2]: The OUTGOING TRUNK QUEUING station being rung
back cannot be picked up by a station with the Call Pickup Group feature. An attempt to pick up
the call will result in the station receiving Reorder Tone.
4.
RESTRICTIONS: A station assigned as fully restricted or with inward restrictions cannot use the
CALL PICKUP feature if assigned to a Call Pickup Group.
5.
THREE-WAY CALLING [T-2]: CALL PICKUP can be used only after a THREE-WAY CALLING
has been reduced to a two-party connection, or the station has returned to an idle state.
6.
SMDR [S-10]: When a call is answered using the CALL PICKUP feature, the station dialing the
Call Pickup code is recorded.
7.
If more than one station line in a Call Pickup Group is ringing, the individual call answered is
selected by the system. System priority is based on a circular chain arrangement, with first
priority given to the station following the station dialing the call pickup code.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Call Pickup - Group - D
term
's MY Line. Access to this group is available from any multi-line
term
.
term
is activated while two or more stations within the group are
term
cannot be used to answer OUTGOING TRUNK QUEUING [O-
term
C-7D
Page 121
Advertisement
Table of Contents
