Table of Contents
Advertisement
M-44
M-44
General Description
This feature permits a call to a CALL FORWARDING - ALL CALLS station to be forwarded multiple times
to a predesignated idle station.
Operating Procedure
To set MULTIPLE CALL FORWARDING - ALL CALLS [C-5] from an individual station:
1.
Lift the handset; receive Dial Tone.
2.
Dial the specific CALL FORWARDING - ALL CALLS access code; receive Special Dial Tone.
3.
Dial the desired target station number; receive Service Set Tone.
To cancel MULTIPLE CALL FORWARDING - ALL CALLS [C-5] from an individual station:
1.
Lift the handset; receive Dial Tone.
2.
Dial the specific CALL FORWARDING - ALL CALLS cancel code; receive Service Set Tone.
To set MULTIPLE CALL FORWARDING - ALL CALLS [C-5] from the ATTENDANT CONSOLE [A-3]:
1.
Press an idle loop key.
2.
Dial the specific CALL FORWARDING - ALL CALLS access code; receive Special Dial Tone.
3.
Dial the TENANT [T-12] number (2 or 3 digits).
4.
Dial the originating station number.
5.
Dial the desired target station number; receive Service Set Tone.
To cancel MULTIPLE CALL FORWARDING - ALL CALLS [C-5] from the ATTENDANT CONSOLE [A-3]:
1.
Press an idle loop key.
2.
Dial the specific CALL FORWARDING - ALL CALLS cancel code; receive Special Dial Tone.
3.
Dial the TENANT [T-12] number (2 or 3 digits).
4.
Dial the originating station number; receive Service Set Tone.
Service Conditions
1.
If CALL FORWARDING - ALL CALLS [C-5] is set at the called station, the call is forwarded to a
designated station that has set CALL FORWARDING-ALL CALLS [C-5] or CALL
FORWARDING-BUSY LINE [C-2].
2.
A call can be forwarded up to five times, maximum, by MULTIPLE CALL FORWARDING - ALL
CALLS [C-5], and only by the voice port of a D
3.
A call will not forward any farther than the station to where it has been forwarded to.
4.
If a forward destination is busy, and if neither CALL FORWARDING - BUSY LINE [C-2] nor CALL
FORWARDING - ALL CALLS [C-5] is set, the caller hears a Busy Tone.
5.
If the originating station is designated as the forward destination, the call will not be forwarded.
6.
CALL FORWARDING - BUSY LINE [C-2] and CALL FORWARDING - ALL CALLS [C-5]
combination:
a.) A maximum of five forwarding operations can be performed by any combination of CALL
FORWARDING-ALL CALLS [C-5] AND CALL FORWARDING-BUSY LINE [C-2].
b.) If the fifth forward destination is busy, the call will forward if CALL FORWARDING -
DON'T ANSWER [C-3] is set. Otherwise, the caller will hear a Busy Tone.
Page 346
Multiple Call Forwarding - All Calls
Multiple Call Forwarding - All Calls
term
, or by a single line telephone.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
