Table of Contents
Advertisement
Service Conditions (cont'd)
This service is available in the following occasions:
a.) When the destination of the CALL FORWARDING - BUSY LINE service is the calling
station.
b.) When the calling party is the attendant console or the night station, and the destination
of the CALL FORWARDING - BUSY LINE service is also the attendant console or the
night station.
SPLIT CALL FORWARDING [S-99] is available only when the calling party is the station or the
CCIS line.
24. When a destination of CALL FORWARDING - BUSY LINE has already been assigned, even if
the feature is restricted by the new office data or changing of Day/Night mode, the assigned data
can still be used or cancelled.
Interactions
1.
If the same access code is used for CALL FORWARDING - BUSY LINE - D
FORWARDING - DON'T ANSWER [C-3], only one key needs to be assigned in AKYD.
2.
An ATTENDANT CAMP-ON [A-1] call is terminated at Station A, and Station A has CALL
FORWARDING - BUSY LINE - D
HUNTING [S-7, 8, 9] Group, the call will Camp-On at Station A and will not Hunt.
3.
When CALL WAITING [C-12, 31], ATTENDANT CAMP-ON [A-1], and CALL BACK [C-1] is
directed toward Station A, which has call forwarding set to Station B, and Station B is busy,
Station A will receive Call Waiting Tone.
4.
A non-controlling UCD station is allowed to activate CALL FORWARDING - BUSY LINE - D
[C-2]. When this station sets CALL FORWARDING - BUSY LINE - D
directly dialed to this station are call forwarded.
5.
The Attendant attempts BUSY VERIFICATION [B-3] to Station A. Station A has CALL
FORWARDING - BUSY LINE - D
is allowed at Station A. If Station A has set CALL FORWARDING - BUSY LINE - D
Attendant Console, BUSY VERIFICATION [B-3] is allowed at Station A.
6.
When CALL FORWARDING - BUSY LINE - D
to originate calls.
7.
When a call follows call forwarding, the destination station is recorded for STATION MESSAGE
DETAIL RECORDING [S-10].
8.
STATION-TO-STATION CALLING [S-11] must be provided.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Call Forwarding - Busy Line - D
term
set to Station B. If Station B is busy and part of a STATION
term
set to Station B. Station B is busy. BUSY VERIFICATION
term
term
is in effect, the activating station may be used
C-2D
term
and CALL
term
term
, only calls that are
term
to the
Page 95
Advertisement
Table of Contents
