Table of Contents
Advertisement
F-2
F-2
General Description
This feature provides dial access to distant Central Offices using Foreign Exchange (FX) trunks. All
incoming calls to the NEAX2400 ICS from the FX Central Office area are placed to the listed Foreign
Exchange Directory number and are answered by the Attendant in a manner similar to LDN service.
Outgoing calls can be made on an Attendant handled basis using direct or dial access and/or on a direct
basis by stations.
Operating Procedure
To place an outgoing FX call from a station:
1.
Lift the handset and receive Dial Tone.
2.
Dial the FX trunk access code and receive Second Dial Tone.
3.
Dial the desired telephone number.
To answer an incoming FX call at the ATTENDANT CONSOLE [A-3]:
1.
The FX lamp flashes.
2.
An audible signal is received.
3.
Press the "FX" or "ANS" key to answer.
4.
Process the call in a normal manner.
Service Conditions
1.
One INCOMING CALL IDENTIFICATION [I-2] key may be used for all FX groups.
2.
Access to various types of trunks may be denied to certain stations according to CLASS OF
SERVICE - INDIVIDUAL [C-15] programming.
3.
TOLL DENIAL/TOLL DIVERSION [T-6] may be provided for FX ACCESS [F-2].
4.
TOLL RESTRICTION - 3/6-DIGIT [T-7] may be provided for FX trunks on a per-route basis.
5.
Care should be exercised in system data assignment when utilizing this feature in conjunction
with LEAST COST ROUTING - 3/6-DIGIT [L-5] since Foreign Exchange trunks may require that
the digit 1 be dialed as a prefix to the desired number.
Interactions
1.
LEAST COST ROUTING - 3/6-DIGIT [L-5]: FX trunk groups may be assigned to a LEAST COST
ROUTING [L-5] list.
2.
ROUTE ADVANCE [R-6]: This feature routes outgoing FX calls over alternate facilities when the
first-choice trunk group is busy.
3.
UNIFORM CALL DISTRIBUTION [U-1]: This feature permits incoming calls, including FX calls,
to be terminated directly from the Central Office to the next idle station in a prearranged group
of stations without Attendant assistance.
4.
DIRECT-IN TERMINATION [D-7]: This feature allows one FX trunk to terminate directly to a
designated station. Incoming FX calls to this station are queued if the station is busy.
5.
OUTGOING TRUNK QUEUING [O-2]: This feature provides a means for station users to dial a
busy FX trunk group to be automatically placed in a queue, and to be called back when a trunk
in the trunk group becomes available.
Page 246
FX Access
FX Access
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
