Last Number Called - Single-Line Station - NEC NEAX 2400 ICS Features Manual

Hide thumbs Also See for NEAX 2400 ICS:
Table of Contents

Advertisement

L-6

Last Number Called - Single-Line Station

General Description
When a station user originates a station-to-station call or an outgoing trunk call, but the attempted call is
not established, this service feature allows the calling station user to recall the same destination by dialing
only the special code instead of dialing all the digits of the number.
Operating Procedure
To operate:
1.
Lift the handset; receive Dial Tone.
2.
Dial the desired party's number.
3.
The call has not been established.
4.
BT (Busy Tone) or ROT (Reorder Tone) is heard.
5.
Hang up.
6.
Lift the handset; receive Dial Tone.
7.
Dial the LAST NUMBER CALL access code (maximum of 3 digits).
8.
The system will automatically redial the last number dialed from that station.
Service Conditions
1.
The number of dial digits to which this service is applicable is 18 maximum.
2.
Dialing any digits after going off-hook causes previously stored digits to be erased from memory
and the new digits to be programmed into memory.
3.
In a STEP CALL [S-13], the final combination of digits is stored into memory. For example, dial
201, 201 is busy; dial 2, station 202 rings; station 202 is stored in the LAST NUMBER CALLED
memory.
4.
In CALL FORWARDING [C-2, 3, 5], CALL PICKUP - GROUP [C-7], and STATION HUNTING
[S-7, 8, 9], the number stored is the number dialed, i.e. the number displayed in the
INTERMEDIATE STATION NUMBER DISPLAY - D
5.
This service feature can be activated when the station accesses STATION-TO-STATION
CALLING [S-11] or station-to-trunk calling.
6.
SPEED CALLING - SYSTEM [S-3, S-21], or GROUP [S-23] numbers (abbreviated digit codes)
can be stored in the LAST NUMBER CALLED memory.
7.
An AUTHORIZATION CODE [A-20] will not be stored, and must be entered each time the LAST
NUMBER CALLED is accessed.
Interactions
LAST NUMBER CALLED will operate for both internal and outgoing calls.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Last Number Called - Single-Line Station
term
[I-10D].
L-6
Page 289

Advertisement

Table of Contents
loading

Table of Contents