Table of Contents
Advertisement
M-1
M-1
General Description
This feature allows a station user dial access to paging equipment, and connects both parties
automatically, after the called party has answered the page.
Operating Procedure
To page:
1.
Calling station dials the Paging access code; receives continuous Ringback Tone for 1 second.
2.
Calling station pages the desired party.
3.
Calling station remains off-hook or hangs up.
To answer: Called party dials the Page answer code.
1.
NON-DELAY OPERATION
The party paged is immediately connected to the calling party.
2.
DELAY OPERATION
The party paged receives Ringback Tone.
The calling station rings.
The calling station goes off-hook and is immediately connected to the paged station.
Service Conditions
1.
A maximum of six routes can be provided with paging trunks.
2.
Paging equipment is customer provided.
3.
One paging trunk will be assigned to each route.
4.
Paging access and answer codes are assigned in System Data programming to correspond with
each route.
5.
The maximum number of digits that can be used as a paging access and/or answer code is 3.
6.
The type of paging service provided on a system basis is programmed via the MAINTENANCE
ADMINISTRATION TERMINAL [M-18] into the System database.
7.
A page waiting to be answered is automatically cancelled after a predetermined program
duration. See VARIABLE TIMING PARAMETER
choices.
8.
Central Office Trunks (COTs) and Tie Line Trunks (TLTs) are used as interface circuits to the
paging equipment.
9.
Loop signaling is the recommended signaling type. Refer to the PAGING TRANSFER
feature.
Interactions
1.
MEET-ME PAGING and PAGING ACCESS [P-1] can be provided simultaneously in the same
system. In ARTD, CDN 6:TCL must be assigned as data "8" for MEET-ME PAGE, while PAGING
ACCESS [P-1] routes may be assigned as data "11", General Page, or as data "1", DDD.
Separate access codes for each feature are required. A MEET-ME PAGING answer and cancel
code is required for each MEET-ME PAGING zone.
Page 306
Meet-Me Paging
Meet-Me Paging
[V-1]
feature for other selectable timing
NEAX2400 ICS Business Features and Specifications
[P-10]
NDA-24143, Issue 4
Advertisement
Table of Contents
