NEC NEAX 2400 ICS Features Manual page 264

D-153
Service Conditions (cont'd)
9. This service is available when:
• an incoming call is directly terminated to a station
• an incoming call is transferred to a station using Call Forwarding - All Calls/Busy Line/Don't
Answer.
10. This service is not available when a call is terminated to an ISDN terminal.
11. FAX Ringer overrides this feature.
12. This feature takes precedence over the Personal Ringer function.
13. A maximum of 12 calling numbers can be assigned for a single station.
14. Ringer patterns 2, 3 or 4 cannot be assigned for this feature. When one of those ringer patterns
is assigned from the MAT, default value "Ringer pattern 6" is automatically set.
15. When System Data 3 is changed, circuit card (LC, ELC) initialization is required.
16. The following circuit cards are required for Analog Caller ID:
Circuit Card Name
17. When the plural incoming calls are simultaneously terminated to the multi-line on the D
priority of ringing pattern is as follows.
Priority
Ringing pattern
Page 234
Distinctive Ringing - Caller ID
PA-8COTBJ
1st
RG7
Firmware
SW-317 8COTBJ PROG-A
SP-1122 CALL-ID PROG-A
SP-3190 8COTBJ PROG-A
2nd 3rd
RG6 RG5
NEAX2400 ICS Business Features and Specifications
Remarks
term
, the
4th 5th
RG0 RG1
NDA-24143, Issue 4