Call Hold Pick Up - NEC NEAX 2400 ICS Features Manual

C-154
C-154
General Description
This feature allows a user to pick up a trunk or station call that is put on hold by a second user. The user
can accomplish this by dialing an access code followed by the telephone number that is holding the call.
Operating Procedure
1. Make a trunk or station call to Station "A".
2. Station "A" places the call in progress on hold.
3. From Station "B", dial the access code and Station "A's" telephone number.
4. Station "B" is connected to the station or trunk call that is on hold at Station "A".
Service Conditions
1. Only stations in the same tenant can use this feature.
2. This feature remains in effect even after hold timeout and the station is in the re-ring state.
3. This feature also overrides the Exclusive Hold feature (a call that is put in Exclusive Hold can be
picked up by using this feature).
4. This feature is available for all NEAX2400 ICS Systems.
Page 190

Call Hold Pick Up

Call Hold Pick Up
(Series 6200 software feature)
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4