Table of Contents
Advertisement
F-7
General Description
This feature is a variation of the ACCOUNT CODE [A-18] feature, which makes it mandatory to enter an
ACCOUNT CODE (up to 10 digits) for all outgoing calls. The account code must be dialed before dialing
the outgoing number. Calls are processed only when the dialed account code is valid.
(Series 6100 software enhancement) The FORCED ACCOUNT CODE can be masked on the D
display if necessary using AUTHORIZATION CODE DISPLAY ELIMINATION [A-99].
Operating Procedure
When dialing an outgoing call:
1.
Lift the handset; receive Dial Tone.
2.
Enter the access code; receive Service Set Tone.
3.
Enter the FORCED ACCOUNT CODE (up to 10 digits); receive Dial Tone.
4.
Dial the desired number.
Note:
The access code for FORCED ACCOUNT CODE will be a maximum of 3 digits.
Service Conditions
1.
The maximum number of digits per ACCOUNT CODE [A-18] is ten.
2.
If both FORCED ACCOUNT CODE and AUTHORIZATION CODE [A-20] are provided in the
system, the maximum number of codes are:
IMG, IMGx:
IMGxh, IMGdxh, MMG, UMG, UMGx: 4000
Note 1: Capacity varies depending on system configuration. It is possible to attain limits of:
IMG, IMGx:
IMGxh, IMGdxh, MMG, UMG, UMGx: approx. 20,000 codes
These specifications are based on the digits being assigned as follows:
1st digit:
2nd digit:
3rd digit:
4th digit:
5th - 8th digits:
9th & 10th digits:
Note 2: See ETI: 082 for details on AUTHORIZATION CODE/FORCED ACCOUNT CODE [F-7] assignment.
3.
AUTHORIZATION CODE [A-20] and FORCED ACCOUNT CODE cannot be provided
simultaneously for the same TENANT SERVICE [T-12] group. System Data programming
determines whether AUTHORIZATION CODE [A-20] or FORCED ACCOUNT CODE is provided
for each Tenant.
4.
Stations are assigned this feature according to CLASS OF SERVICE - INDIVIDUAL [C-15]
programming in System Data.
5.
An assigned FORCED ACCOUNT CODE can be used for REMOTE ACCESS TO SYSTEM [R-
2].
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Forced Account Code
Forced Account Code
500
approx. 4,000 codes
A (when A equals a unique digit from 0 - 9)
B - C (when b, c equal any two unique digits from 0 - 9)
D-E (when d,e equal any two unique digits from 0 - 9)
F-G-H (when f, g, h equal any three unique digits from 0 - 9)
Any combination 0 - 9
Assigned using the checksum. These are for validation purposes only.
See ETI: 091 for more details.
F-7
term
Page 253
Advertisement
Table of Contents
