NEC NEAX 2400 ICS Features Manual page 451

Operating Procedure (cont'd)
5. Station A receives Ringback Tone, and the LCD displays:
term
D Series E
6. A 4-party call is established. The line appearance will flash, indicating I-USE [I-8], and the LED
of PRIVACY key will be turned off. The LCDs of the associated D
term
D Series E
By following the operations described, a maximum 8-party call can be established.
To restrict a station from overriding an 8-party call:
1. Station A presses line appearance of Station B, which is engaged in an 8-party call. The LCD of
Station A displays (for 10 seconds):
term
D Series E
Service Conditions
1. PRIVACY RELEASE is available for a D
2. PRIVACY RELEASE is not available when one of the stations in communication is a single line.
3. Single line stations cannot bridge into the busy connection.
4. This feature is available when the PRIVACY key is pressed to establish PRIVACY RELEASE.
5. A station has to be in one of the following states to set PRIVACY by pressing either PRIVACY
key or P-RLS key:
a.) Connected to station or trunk,
b.) Engaged in a maximum 7-party call.
However, PRIVACY cannot be set when the overriding party has already received Ringback Tone.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Privacy Release
CNF WAIT
(Time Display)
CONF WAIT
(Time Display)
CNF
(Time Display)
CONF
(Time Display)
CNF RST
(Time Display)
CONF REST
(Time Display)
term
term
connected to a station or trunk.
P-18
s display:
Page 421