NEC NEAX 2400 ICS Features Manual page 272

Hide thumbs Also See for NEAX 2400 ICS:
Table of Contents

Advertisement

E-11
Service Conditions (cont'd)
12. The emergency station can be a member of a UCD [U-1] group. If a call is distributed to the
emergency station after queuing, system message printout is not performed.
13. When the emergency station is busy, CALL BACK [C-1] to the emergency station is effective.
(No printout is performed).
14. When the emergency station is busy, CALL WAITING - ORIGINATING [C-31] and CALL
WAITING - TERMINATING [C-12] are effective, but this service feature is not available.
However, when a 2-way call is made between an emergency station and another station, CALL
BACK [C-1] is performed when the station releases.
15. When an emergency station is busy, ATTENDANT CAMP-ON WITH TONE INDICATION [A-1]
to the emergency station is effective, but the service feature is not available to the CAMP-ON
call.
term
16. When a D
possible. If the calling station goes on-hook before the emergency station answers by pressing
the "SPKR" key or going off-hook, CALL BACK [C-1] is not possible.
17. When Camp-On or Privacy is set to a station, the station cannot be recalled from the emergency
station. Therefore, data security (SFI=11 should be 0) must be assigned to the emergency
stations, so that Camp-On and Privacy cannot be set.
Interactions
1.
STATION-TO-STATION CALLING [S-11] must first be provided.
2.
SINGLE-DIGIT STATION CALLING [S-1] may be utilized with this feature.
3.
If re-ring is not in service, the Emergency Station can press the XFR key to re-ring the calling
station.
Page 242
Emergency Call
is used as an emergency station, VOICE CALL [V-2] to the emergency station is
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4

Advertisement

Table of Contents
loading

Table of Contents