NEC NEAX 2400 ICS Features Manual page 373

Operating Procedure (cont'd)
Procedure 2
To cancel a Message Waiting Indication from a single line telephone:
1. Lift the handset; receive Dial Tone.
2. Dial the Message Waiting Cancel access code (up to 3 digits); receive Special Dial Tone.
3. Dial the desired station number; receive Service Set Tone.
4. Message Waiting indication is cancelled.
To cancel a Message Waiting Indication from a D
1. Lift the handset or press the "SPKR" key; receive Dial Tone.
2. Press the "Message Waiting Cancel" line/feature key, receive Special Dial Tone.
3. Dial the desired station number; the LCD displays, and Service Set Tone is heard.:
term
D Series E
4. Message Waiting indication is cancelled.
Service Conditions
1. Any number of D
2. Any attempt to set Message Waiting to a station that already has a Message Waiting indication
will receive Busy Tone.
3. Each station can cancel the Message Waiting indication.
4. This feature can be restricted by CLASS OF SERVICE - INDIVIDUAL [C-15].
5. Message Waiting for one station of the network can be controlled from the ATTENDANT
CONSOLE [A-3] and any other station at the same time.
6. The Message Waiting indication on a station appears as follows:
Type of Station Set
Single line telephone with MWL D
Series without display
term
D Series with display
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Message Waiting Lamp Setting - Station
MW CNCL
(Time Display)
MW CANCEL
(Time Display)
term
stations within the system can be assigned to activate this feature.
term
term
or MY Line:
Condition
Message Waiting Lamp is ON
Display shows:
(Time Display)
term
D
(Time Display)
MW
Series E
MW
Page 343
M-30