Station Hunting - Secretarial - NEC NEAX 2400 ICS Features Manual

S-8
General Description
This feature allows calls to a Hunt group to forward to a secretarial station when all the stations in the
group are busy.
Operating Procedure
No manual operation is required.
Service Conditions
1. When all stations within a Hunt group are busy, the incoming call is routed to the station
programmed as the Secretarial Station.
2. If the Secretarial station is busy, the caller will hear a Busy Tone.
3. The maximum number of stations per Hunt group is 20. One group may have 40 stations.
4. A maximum of 255 Hunt groups can be overflowed to a Secretarial station.
5. There is no limit on the number of Hunt groups per system.
6. If a Hunt station has set CALL FORWARDING-ALL CALLS [C-5] or DO NOT DISTURB [D-21D],
calls to the group will bypass the station.
7. Recalls from CALL BACK [C-1] and OUTGOING TRUNK QUEUING [O-2] will not hunt.
8. The maximum number of STATION HUNTING groups per system is:
SIM (ICS), IMGx
IMGxh, IMGdxh, MMG/UMG (ICS), UMGx
9. The terminating sequence of service features to a station is as follows:
CALL FORWARDING - ALL CALLS
CALL FORWARDING - BUSY LINE
STATION HUNTING
CALL WAITING - ORIGINATING
CALL WAITING - TERMINATING
Interactions
1. Secretaries are not counted as one of the 20 allowed stations per group.
2. STATION MESSAGE DETAIL RECORDING [S-10]: The number recorded is the station number
where the call actually terminates.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4

Station Hunting - Secretarial

Station Hunting - Secretarial
63
255
[C-5]
[C-2]
[S-7, S-8, S-9]
[C-31]
[C-12]
S-8
Page 459