Table of Contents
Advertisement
F-6
F-6
General Description
This feature allows a station to report a noisy or faulty trunk number by dialing a special access code
before hanging up. The FAULTY TRUNK REPORT consists of a trunk number, station number,
associated time division switch and reported time. This information is displayed at the MAINTENANCE
ADMINISTRATION TERMINAL (MAT) [M-18] and/or system printer.
Operating Procedure
To enter a FAULTY TRUNK REPORT:
1.
Switchhook flash before disconnecting; receive Special Dial Tone.
2.
Dial the FAULTY TRUNK REPORT access code; receive Service Set Tone.
3.
The MAT [M-18] records the FAULTY TRUNK REPORT, returns line to the original connection.
Service Conditions
1.
This feature may be accessed during any station-to-station or station-to-trunk connection.
2.
The following information will appear on a station-to-station FAULTY TRUNK REPORT:
a.) station at which the operation was performed
b.) called station number
c.) time division switch
d.) time and date.
3.
The following information will appear on a station-to-trunk FAULTY TRUNK REPORT:
a.) station at which the operation was performed
b.) route number and trunk number
c.) time division switch
d.) time and date.
4.
Stations are assigned this feature according to CLASS OF SERVICE - INDIVIDUAL [C-15]
programming in system data.
5.
When this feature is activated, a supervisory alarm (SUP) will appear on the NEAX2400 ICS.
Interactions
1.
When this feature is activated, System Message 6-H, Faulty Trunk is generated. This message
is sent to the MAT or fault printer.
2.
FAULTY TRUNK REPORT data is displayed/printed in the hexadecimal numbering system.
3.
The FAULTY TRUNK REPORT is displayed/printed periodically or can be obtained directly with
the DFTD, Display of System Message command.
Page 252
Faulty Trunk Report
Faulty Trunk Report
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
