Table of Contents
Advertisement
S-24D
S-24D
General Description
This feature allows for a D
Operating Procedure
1.
Go off-hook, seize any idle line, and dial a number.
2.
When the number has been dialed, press the SAVE AND REPEAT (S&R) feature key. The
dialed number is stored for future use. The associated LED lights. The LCD displays:
term
D
Series E
Note:
Dialed number displays only 16 digits (16DC, 24DS) when monitoring, however, 24 digits can actually be
stored in memory.
3.
To access this number later, go off-hook, receive dial tone, and press the S&R key; the saved
number is dialed.
Service Conditions
1.
One number per station can be saved.
2.
The save function may be set at any time after the number has been dialed and before going on-
hook.
3.
It is not necessary to erase a saved number in order to save another. The second number
replaces the first.
term
4.
A D
user may save the number of an incoming call, if the call originates at a station in the
system. A call from an outside trunk cannot be saved.
5.
If necessary, dialing can be added after a repeat operation.
6.
To monitor the saved digits, press the S&R key while idle. The saved digits will be displayed on
the LCD.
7.
If the LED associated with S&R goes out, the memory is erased. The S&R key must be pressed
again, using the above procedure, to retain the original memory.
Interactions
AKYD is assigned after ASDT is assigned. Assign a LEN as TEC 12.
Page 478
Save And Repeat - D
Save And Repeat - D
term
set to save a specific dialed number and then redial that number later.
S&R
(Time Display)
S&R
(Time Display)
term
term
Example: Saved
Local Number
9-NXX-XXXX
9-NXX-XXXX
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
