No.
Name
*1
15)
RS-232 connector
16)
RUN/STOP/RESET switch
*1
When a cable is connected to the RS-232 connector at all times, clamp the cable to prevent a poor connection, moving,
and disconnection by unintentional pulling.
The Q6HLD-R2 type RS-232 connection disconnection prevention holder is available as a clamp for RS-232 connector.
*2
Operate the RUN/STOP/RESET switch with your fingertips.
To prevent the switch from being damaged, do not use any tool such as screw driver.
Connector for connecting a peripheral device by RS-232.
Can be connected by the RS-232 connection cable (QC30R2).
RUN: Executes sequence program operation.
STOP: Stops sequence program operation.
RESET:
*2
Performs hardware reset, operation error reset, operation initialization or like.
(
Page 182, Section 6.4.1)
CPU module
RS-232 cable
Application
Q6HLD-R2
Fixing screw
CHAPTER 6 CPU MODULE
121
6