Mitsubishi Electric Q26UD(E)HCPU User Manual page 640

(2) Added functions and supported CPU module and programming tool versions
Function
Function block ( Operating manual (for function block)
for the programming tool used)
Structured text (ST) language (
Programming Manual (Structured Text))
MELSAP3 ( MELSEC-Q/L/QnA Programming Manual
(PID Control Instructions))
*1
PID operation function (
Programming Manual (PID Control Instructions))
*1*3
Real number operation
Intelligent function module event interruption
Device initial value automatic setting function
Remote password setting function
E-mail parameter ( Manual of the module that supports
the e-mail function)
Online change using pointer
Increased file register capacity (32K points to 64K points)
Multiple CPU system (
CPU System))
Online change (multiple blocks)
CC-Link Remote network additional mode (
System Master/Local Module User's Manual)
*1 When the CPU instruction installed by GX Developer Version 8 is read by GX Developer of Version 7 or earlier, it is
processed as an "instruction code error" by GX Developer.
*2 Unsupported by the Q00JCPU.
*3 For details, refer to the following.
Qn(H)/QnPH/QnPRHCPU User's Manual (Function Explanation, Program Fundamentals)
638
MELSEC-Q/L
MELSEC-Q/L/QnA
*3
*3
*3
*3
*2*3
QCPU User's Manual (Multiple
*3
CC-Link
×: Not supported, ---: Not related to the programming tool
Serial
Function
number (first
version
5 digits)
"04121" of
A
earlier
"04122" or later
B
"06112" or later
Programming tool version
GX Works2 GX Developer
Version 8.00A or
later
Version 1.15R or
later
---
Version 8.00A or
later
Version 8.03D or
later