Mitsubishi Electric Q26UD(E)HCPU User Manual page 557

(8) Debugging
Number Name Meaning
Real-time
Real-time
monitor free
monitor free
SD830 buffer
buffer
capacity (K
capacity
bytes)
Debug Debug
SD840 function function
usage usage
*1 Modules whose serial number (first five digits) is "10042" or later
*2 Built-in Ethernet port LCPU whose serial number (first five digits) is "16072" or later
(9) Latch area
Number Name Meaning
Auto loading Auto loading
SD909 target folder target folder
number number
Explanation
The free buffer capacity of realtime monitor is stored in units
of K bytes. A smaller value leads to a higher probability of the
occurrence of processing overflow.
This register indicates the status of the debug function usage
as shown below.
0: Forced on/off for external I/O
1: Executional conditioned device test
2 to 15: Empty (fixed at 0)
b15 to b2 b1 b0
0
Forced ON/OFF for
external I/O
Executional conditioned
device test
(0: Not used, 1: Used)
Explanation
This register is used to specify the number of the folder
targeted for auto loading.
0 (default):"AutoLoad" folder
1 to 99:"AutoLoad**" folder (The folder number can be
specified at ** (01 to 99).)
The value 0 is stored upon successful completion of auto
loading.
APPENDICES
Corresponding
Set by Corresponding
ACPU
(When Set)
D9
S (Status
New
change)
S (Status
New
change)
Corresponding
Set by Corresponding
ACPU
(When Set)
D9
S (When
auto
loading is New
completed)/
U
A
CPU
*2
LCPU
*1
QnU
LCPU
CPU
*3
LCPU
555